Faults and trouble shootings for V-belts and V-Ribbed belts

Faults and trouble shootings for V-belts and V-Ribbed belts

Back
Appearance Cause Solution
Rupture
Serious cleavage in a certain spacing
Undersized diameter of belt wheel
Power transmission at high temperature
There is dust or chemical substances on gearing
Increase diameter of belt wheel or redesign
transmission load
Improve ventilation
Use proper protective device

Minor cleavage occurred unevenly
Belt used for long time Replace belt

Disconnection of belt
Overload or shock loading
Extraneous material in gearing
Tensile body (core wire) damaged
Redesign transmission load
Use proper belt protective device
Observe correct belt installation sequence

There is brightness or flash
on the side of belt
Oil pollution
Belt slips
Detoxify oil
Readjust belt tension

Secession of belt layer
Oil pollution
Belt slipping or insufficient tension
Disalignment of shaft line
Incorrect specification of belt
Detoxify oil
Readiust the tension of belt
Readiust the shaft line of belt wheel is in
cincidence and make some modification
Replace with a belt in correct specification
Abrasion
Abrasion of the side of belt
Belt wheel abrasion or surface asperity of belt wheel
Belt slips
Disalignment of shaft line
Incorrect specification of belt
Replace belt wheel
Readjust the tension of belt
Confirm if the shaft line of belt wheel is in
coincidence and make some modification
Replace with a belt in correct specification

Abrasion of the upper side of belt
Mutual interference between belt and
protective device
Incorrect hanging of belt on belt wheel
Undersize belt
Replace, repair or redesign belt
protective device
Install belt on the belt wheel correctly
Use a belt proper to the belt wheel

Abrasion of the bottom side of belt
Abrasion of belt wheel
Incorrect hanging of belt on belt wheel
Sink of belt
Replace belt
Hang belt on the belt wheel correctly
Use a belt proper to the belt wheel

Crack of core wire on the side of belt
Small belt wheel
Damaged core wire
Disalignment of shaft line
Increase diameter of belt wheel or confirm the
transmission load
Replace belt and observe correct installation sequence
Confirm if the shaft line of belt wheel is in coincidence and make some modification

Belt side is stiff or burnt
Belt slips
Power transmission at high temperature
Overload
Readjust the tension of belt
Improve draft condition
Redesign transmission load

Inverse or Curl of belt occur too early
Disalignment of shaft line
Extraneous material on belt wheel
Insufficient tension of belt
Damage core wire of tensile body
Mismatched belt
Confirm if the shaft line of belt wheel is in
Coincidence and make some modification
Clean belt wheel
Readjust the tension of belt
Replace belt and observe correct installation sequence
Replace with suitable belt

Inverse or Curl of belt occur too late
Abrasion of damage of belt wheel
Insufficient tension of belt
Design load is insufficient
Replace belt wheel
Readjust the tension of belt
Redesign transmission load
Long and sharp noise Belt slips
Pollution
Readjust belt tension
Clean belt and belt wheel
Noise during jumping Insufficient belt tension
Disalignment of shaft line
Mismatched belt
Readjust belt tension
Confirm if the shaft line of belt wheel is in
coincidence and make some modification
Replace with suitable belt
Noise of attrition Interfere between belt and
protective device
Replace, repair or redesign belt protective device
Noise during sanding Damaged bearing Replace bearing or smear bearing oil
Deviant noise occurred Abrasion or damage of belt
Improper belt
Too small belt wheel
Replace belt wheel
Replace with proper belt
Increase diameter of belt wheel
Distinct swing Insufficient belt tension
Distance between shafts
is too large
Mismatched belt
Disalignment of shaft line
Readjust belt tension
Decrease the shafts distance
Replace with suitable belt
Confirm if the shaft line of belt wheel is in coincidence and make some modification

Location

  • >>

Container1

Products Search

 
  • +86-20-66671719
  • +86-20-66671715
  • 2355411889
  • Master@aa-top.com
  • NO.2 Bicun North Road, Xinhua Industrial Park, Huadu District, Guangzhou, Guangdong Province, China (P.C.:510800) 
  • Rm 104, No.2 Jingui East Street, GuangYuan East Road, Yuexiu District, Guangzhou