Faults and trouble shootings for timing belts

Faults and trouble shootings for Timing Belts

Back
Appearance Cause Solution
Abrasion
Abrasion of brim
Disalignment of shaft line
Skew, coarse or damaged flange
Insufficient tension of belt
Over width of belt
Confirm if the shaft lines of belt wheel are in
coincidence and make some modification
Arrange or replace flange
Readjust the belt tension
Replace with a belt with proper width

Abrasion of belt teeth
Overload
Insufficient tension of belt
Disalignment of shaft line
Improper belt
Abrasion, damage or coarseness
of belt wheel
Increase transmission load
Reform the belt tension
Confirm if the shaft lines of belt are in
coincidence and make some modification
Replace with a belt suitable for the belt wheel
Replace wheel belt

Rupture of belt teeth
Overload
Number of teeth that gear belt is less than 6
Disalignment of shaft line
Improper belt
Abrasion of belt wheel
Insufficient tension of belt
Adjust transmission load
Redesign transmission load
Confirm if the shaft line of belt wheel is in
coincidence and make some modification
Replace with a belt suitable for the belt wheel
Replace belt wheel
Reform the belt tension

Crack of back
Undersized diameter of belt wheel
Unfit to surrounding environment
Use rear idler
Increase diameter of belt wheel of redesign
Reduce environmental factors and alter belt
Use inside idler

Disconnection of belt
Over shock lading
Undersized diameter of belt wheel
Damaged belt
Extraneous material in gearing
Redesign transmission load
Increase diameter of belt wheel or redesign transmission load
Observe correct installation sequence
Use proper belt protective device

Overheat
Disalignment of shaft line
Belt tension is over
Discordance of belt specification
Confirm if the shaft line of belt wheel is in
coincidence and make some modification
Reform the belt tension
Replace with a belt suitable for the belt wheel
Decrease of tension force Overload
Undersized diameter of belt wheel
Abrasion of belt wheel
Overheat
Adjust transmission load
Increase diameter of belt wheel or redesign
transmission load
Replace belt wheel
Inspect belt tension or heat conduction
Noise Improper tension force
Disalignment of shaft line
Use improper belt
Undersized diameter of belt wheel
Abrasion of belt wheel
Leading flange is skew
Reform the belt tension
Confirm if the shaft lines of belt are in
coincidence and make some modification
Replace with a belt suitable for the belt wheel
Increase diameter of belt wheel of redesign transmission load
Replace belt wheel
Replace leading flange
Swing Improper tension force
Incorrect belt specification
Axle lining or bolt pin is loosen
Readjust belt tension
Replace with a belt suitable for the belt wheel
Inspect axle lining or bolt pin

Location

  • >>

Container1

Products Search

 
  • +86-20-66671719
  • +86-20-66671715
  • 2355411889
  • Master@aa-top.com
  • NO.2 Bicun North Road, Xinhua Industrial Park, Huadu District, Guangzhou, Guangdong Province, China (P.C.:510800) 
  • Rm 104, No.2 Jingui East Street, GuangYuan East Road, Yuexiu District, Guangzhou